Estado de conservação: 9/10
Cabinet size is the only feature the Response D38 has in c ommon with its predecessor, the highly regarded Response 3.8. Internally, everything has been changed to produce a dynamic new level of performance with vastly increased efficiency and sensitivity whilst retaining all the virtues of the earlier model. Good quality valve or Class A transistor amplifiers with an output as low as 10 watts will produce fine results from these exciting new loudspeakers.
The cabinets themselves, handcrafted and finished in real wood veneers, are extremely rigid and well damped to minimise colouration. Reconfigured internally with a new porting system similar to that used on the flagship D100 model, loading for the bass drivers is now provided through a large port which pressurises the air between the cabinet and the plinth, releasing the air through side vents. This method of coupling makes room placement less critical.
A new generation of extremely sensitive drive units has been introduced. Two new 6 1/2″ polypropylene coated bass/midrange units, built by one of the UK’s leading studio monitor manufacturers, sit either side of a radical new one inch soft dome tweeter. This tweeter, with an improved surround and frontplate and new internal damping combines seamlessly with the other drive units through a sophisticated HQC crossover network and ProAc oxygen-free wiring.
The resulting sound is one of tremendously dynamic speed and power, coupled with a finesse and smoothness which guarantees fatigue-free listening for extended periods. The enhanced sensitivity of the new drive units unearths the tiniest detail from any type of recording to provide a sublime and involving musical experience.
Especificaciones:
| Impednance | 4 ohms |
| Recommended Amplifiers | 10 to 250 watts |
| Frequency Response | 20 Hz to 30 kHz |
| Sensitivity | 90 dB linear for 1 watt at 1 metre |
| Bass/Midrange (2) | Driver 6 1/2″ (165 mm) ProAc unit with coated polypropylene cone on die-cast chassis |
| Tweeter | ProAc 1″ (25 mm) soft dome with special surround and inner damping |
| Crossover | HQC crossover using dedicated components and wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring and bi-amping. |
| Dimensions | 49″ (1244 mm) high on plinths with conical feet 9 1/4 ” (235 mm) wide 13 1/2 ” (343 mm) deep |
| Weight | 88 lbs (40 kg) /cabinet |
| Mode | Floorstanding |
| Grille | Acoustically transparent crimplene |
| Finish | Available in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Ebony, Bird’s Eye Maple and other finishes to special order |
