(31) 2555 1223 e (31) 2555 1224



Disponível: Em estoque

R$ 2.400,00
12x de R$ 240,97
Entre em contato e tire suas dúvidas sobre o produto.

Mais Imagens



Saída 3,3 mV
4,1 gramas de massa total
Resposta frequência 20 Hz – 30 kHz


A Briefing on Ortofon Moving Coil Cartridges
Nothing demonstrates more convincingly Ortofon´s commitment to be the world´s last cartridge manufacturer than the ongoing development of new state-of-the-art models, and Ortofon will continue to refine upon the level of sound quality attainable from analogue recordings. Since 1948 Ortofon has introduced about 100 different moving coil models, and more are to follow. Contrary to other types of phono catridges, the moving coil principle is not suited for mass production. Each of the four coils contains between 11 an 24 turns of wire, depending on model, and has to be wound by hand under a microscope. The wire itself is much thinner than a human hair. The high degree of craftsmanship involved is one of the "secrets" behind Ortofon's reputation.

Now all that has changed...
With the introduction of the first X Series cartridges, the X1 and X3, Ortofon demonstrated to the world that it is possible to produce MC cartridges with sufficiently high output to eliminate the need for additional step-up devices-without compromising the construction principles and unique sound quality of moving coil designs.What this means to you is that pure Ortofon Moving Coil Sound is now available for the first time at "real world" prices. And now we have taken things one step further. By building on our experience with the X1 and X3, as well as our unparalleled background in MC design, Ortofon has made the supreme statement in high output MC technology, the Ortofon X5 moving coil cartridge. The X Series cartridges are extremely compact, ultra-light samples of the audio engineering art. The powerful Samarium Cobalt magnet weighs a mere 0.45 gram, a fraction of the normal two grams found in the average cartridge. While the pole pieces in most MC designs usually consist of as many as three of even four separate metal parts, the Ortofon X Series employs a single iron yoke encircling the magnet and weighing a negligible 0.35 grams. This construction detail not only contributes to the compact design of the X Series; it also provides improved mechanical integrity and an exceptionally powerful and uniform magnetic field. In addition , absolute phase is ensured by correct polarization of the magnet. 

High-Output Moving Coil Cartridges
Four decades ago Ortofon introduced the world's first moving coil playback cartridge. Since then, the MC principle has been universally acknowledged as the ultimate sonic performance. Unfortunately, the high price of moving coil technology and the necessity of an outboard step-up device to boost the low output voltage made MC cartridges a luxury available only to the select few. The Ortofon X5 is fitted with the new, nude Fritz Gyger II diamond, with a shape and contact surface very close to the theoretical ideal, the profile of the record cutting stylus, The high end of the Ortofon X5 goes up to 45 kHz.

The Moving System
The advanced construction of the moving system and the employment of only the finest select components are two more significant factors in the audible superiority of the Ortofon X1, X3 and X5 over other High Output MC designs. The X Series moving system consists of diamond stylus, cantilever and armature with coils mounted to the damping system and suspension wire. The cross-shaped miniature armature for the coil windings offers dramatic improvements in channel separation. The armature is also extremely rigid with a shape which allows more windings than in conventional low output MC designs. The equivalent stylus tip mass of the X Series is kept at an absolute minimum to allow the cartridge to respond accurately and rapidly to variations in the music signal. This is achieved through the use of ultra-fine copper. Ortofon has been able to reduce the number of windings to less than half that of competitive High Output MC designs because of the high magnetic induction in the air gap. As a result of these efforts the X Series armature weighs a minuscule 0.0012 grams, with possibly the lowest equivalent stylus tip mass ever in a High output MC cartridge. The cantilever is tooled from lightweight, rigid aluminum and the damping system in all three X Series models consists of a layer of asymmetric butyl rubber to ensure the shortest possible distance to the magnet and good damping characteristics over the entire frequency range. The suspension wire is manufactured from piano wire-an Ortofon speciality-in an exclusive galvanic process mastered only by Ortofon.

Details on the Ortofon MC3 Turbo
The MC 3 Turbo takes high output moving coil (MC) cartridges a step further, with a high polished, nude fine line diamond. The MC 3 Turbo has a 3.3mV output, which is perfect for use with virtually any moving magnet (MM) phono preamps, included inbuilt models. The nude fine line diamond resolves a high level of detail and provides expansive stereo imaging.

Jerry Raskin's Comments on the MC3 Turbo
“The Ortofon MC 3 Turbo high output moving coil phono cartridge is a very satisfying performer. Its tight bass is detailed and thrilling. I found myself completely involved in the music. This cartridge has been a favorite of the Ortofon high output series for its neutrality and silky smooth performance.”

Ortofon MC 3 Turbo Technical Data 

  • Output voltage at 1000 Hz, 5cm/sec.: 3,3 mV
  • Channel balance at 1 kHz: < 1,5 dB
  • Channel separation at 1 kHz: > 24 dB
  • Channel separation at 15 kHz: >15 dB
  • Frequency range: 20-30.000 Hz
  • Frequency response: 20-20.000 Hz + 4 / - 1 dB
  • FIM distortion at recommended tracking force, DIN 45.542: < 1%
  • Tracking ability at 315Hz at recommended tracking force: > 70 µm
  • Compliance, dynamic, lateral: 13 µm/mN
  • Stylus type: Nude Fine Line
  • Stylus tip radius: r/R 8/40 µm
  • Equivalent stylus tip mass: 0,75 mg
  • Tracking force range: 1,8-2,2 g (18-22 mN)
  • Tracking force, recommended: 2 g (20 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 100 Ohm
  • Recommended load impedance: 47 kOhm / < 500 pF
  • Cartridge body material: Noryl
  • Cartridge color: Black
  • Cartridge weight: 4,1 g

Escala de classificação

Novo – Item lacrado na caixa.

Demo – Item tirado da caixa apenas para demonstração aos clientes pela equipe da HIFICLUB. Não foi utilizado ou manuseado por clientes. O item está em perfeito estado estético e de funcionamento. Não sofreu qualquer reparo ou modificação. Usado como demo pelo tempo máximo de 3 meses.

9/10 – Item praticamente novo e com pouco uso. Estado geral excelente. Item em perfeito funcionamento. Não sofreu qualquer reparo ou modificação.

8/10 – Item em muito bom estado. Numa vistoria minuciosa, é possível encontrar alguns detalhes estéticos, como sutis marcas de uso. Pode apresentar um pequeno risco, mas, nunca em áreas mais visíveis do item, como a parte da frente de um aparelho ou caixa de som.

7/10 – Item em bom estado. É, visivelmente, um item usado, porém, bem cuidado. Pode ter marcas ou riscos, no entanto, nunca em áreas mais visíveis.


Devido as recomendações do Ministério da Saúde, suspendemos temporariamente o nosso atendimento presencial em nosso showroom.

Estamos trabalhando em regime de Home Office. Nossa equipe está à disposição para te atender pelos números whatsapp: (31) 2555 1223 ou (31) 98436 5435

ler comunicado hide