ORTOFON MC1 TURBO MC High Output

R$ 1.890,00

12x de R$ 186,05
SKU: ANALOGORTOFONMC1TURBO Categorias: , ,

    Descrição

    COR: BLACK
    CONDIÇÃO: NOVO
    TIPO DE CAPSULA: MC
    Saída 3,3 mV
    4,1 gramas de massa total
    Resposta frequência 20 Hz – 25 kHz

    Cartuchos Ortofon High Output MC

    Em 1948, a Ortofon introduziu o primeiro cartucho de bobina móvel do mundo. Desde então, o princípio MC tem sido universalmente reconhecido como o melhor desempenho sonoro. Embora o alto preço da tecnologia de bobina móvel e a necessidade de um dispositivo externo para aumentar a baixa tensão de saída tornassem os cartuchos MC um luxo.

    Com a introdução dos primeiros cartuchos High Output X Series, a Ortofon demonstrou que é possível produzir cartuchos MC com saída suficientemente alta para eliminar a necessidade de dispositivos adicionais sem comprometer os princípios de construção e a qualidade de som exclusiva dos projetos de bobinas móveis.

    Os cartuchos da série Ortofon High Output oferecem a você a oportunidade de desfrutar do lendário som puro da bobina móvel Ortofon sem as desvantagens notórias de dispendiosos dispositivos extra de intensificação.

    A alta tensão de saída dos cartuchos da série High Output é compatível com a entrada fono MM normal de qualquer amplificador.

    The Moving System
    The advanced construction of the moving system and the employment of only the finest select components are two more significant factors in the audible superiority of the Ortofon X1, X3 and X5 over other High Output MC designs. The X Series moving system consists of diamond stylus, cantilever and armature with coils mounted to the damping system and suspension wire. The cross-shaped miniature armature for the coil windings offers dramatic improvements in channel separation. The armature is also extremely rigid with a shape which allows more windings than in conventional low output MC designs. The equivalent stylus tip mass of the X Series is kept at an absolute minimum to allow the cartridge to respond accurately and rapidly to variations in the music signal. This is achieved through the use of ultra-fine copper. Ortofon has been able to reduce the number of windings to less than half that of competitive High Output MC designs because of the high magnetic induction in the air gap. As a result of these efforts the X Series armature weighs a minuscule 0.0012 grams, with possibly the lowest equivalent stylus tip mass ever in a High output MC cartridge. The cantilever is tooled from lightweight, rigid aluminum and the damping system in all three X Series models consists of a layer of asymmetric butyl rubber to ensure the shortest possible distance to the magnet and good damping characteristics over the entire frequency range. The suspension wire is manufactured from piano wire-an Ortofon speciality-in an exclusive galvanic process mastered only by Ortofon.

    Details on the Ortofon MC1 Turbo
    The MC 1 Turbo is an excellent entry into the world of high output moving coil (MC) cartridges, with an elliptical stylus profile. The MC 1 Turbo has a 3.3mV output, which makes it perfect for use with inbuilt phono preamps – specifically ones designed for moving magnet (MM) cartridges. The MC 1 Turbo provides a taste of the linearity and precision of moving coils, but without the need for additional high gain preamps or transformers.

    MC 1 Turbo Technical Data

    • Output voltage at 1000 Hz, 5cm/sec.: 3,3 mV
    • Channel balance at 1 kHz: < 2 dB
    • Channel separation at 1 kHz: > 22 dB
    • Channel separation at 15 kHz: > 15 dB
    • Frequency range: 20-25.000 Hz
    • Frequency response: 20-20.000 Hz + 4 / – 1 dB
    • FIM distortion at recommended tracking force, DIN 45.542: < 1%
    • Tracking ability at 315Hz at recommended tracking force: > 65 µm
    • Compliance, dynamic, lateral: 13 µm/mN
    • Stylus type: Elliptical
    • Stylus tip radius: r/R 8/18 µm
    • Equivalent stylus tip mass: 0,75 mg
    • Tracking force range: 1,8-2,2 g (18-22 mN)
    • Tracking force, recommended: 2 g (20 mN)
    • Tracking angle: 20°
    • Internal impedance, DC resistance: 100 Ohm
    • Recommended load impedance: 47 kOhm / < 500 pF
    • Cartridge body material: Noryl
    • Cartridge color: Black
    • Cartridge weight: 4,1 g
    • Tracking force, recommended: 2 g (20 mN)
    • Tracking angle: 20°
    • Internal impedance, DC resistance: 100 Ohm
    • Recommended load impedance: 47 kOhm / < 500 pF
    • Cartridge body material: Noryl
    • Cartridge color: Black
    • Cartridge weight: 4,1 g

    Informação adicional

    Peso1 kg

    Escala de classificação

    Novo – Item lacrado na caixa.

    Demo – Item tirado da caixa apenas para demonstração aos clientes pela equipe da HIFICLUB. Não foi utilizado ou manuseado por clientes. O item está em perfeito estado estético e de funcionamento. Não sofreu qualquer reparo ou modificação. Usado como demo pelo tempo máximo de 3 meses.

    9/10 – Item praticamente novo e com pouco uso. Estado geral excelente. Item em perfeito funcionamento. Não sofreu qualquer reparo ou modificação.

    8/10 – Item em muito bom estado. Numa vistoria minuciosa, é possível encontrar alguns detalhes estéticos, como sutis marcas de uso. Pode apresentar um pequeno risco, mas, nunca em áreas mais visíveis do item, como a parte da frente de um aparelho ou caixa de som.

    7/10 – Item em bom estado. É, visivelmente, um item usado, porém, bem cuidado. Pode ter marcas ou riscos, no entanto, nunca em áreas mais visíveis.