Descrição
TECHNICAL SHEET EXPERT 220 Pro
ESTADO 9/10
GENERAL SPECIFICATIONS
- Finish : Chassis carved out of a single aluminium block
- Colour : Dark chrome finish
- Dimensions : Length: 383mm | Width: 383mm | Height: 40mm
- Weight : 5.9Kg
- Installation : Horizontal or vertical installation with automatic tilt detection
- Synchronisation : Up to 8 units
PERFORMANCES
- Power : 2x220WRMS 6Ω
- Signal-to-Noise ratio : 130dB
- THD – 130W/6Ω : 0,0005% / -106dB
- THD – 10W/6Ω : 0,00025% / -112dB
- Output impedance : 0,001Ω
- Damping factor : 8000
- Bandwidth :
- DC-30kHz (-0.1dB)
- DC-95kHz (-3dB)
- Phase :
- 0.4° at 20kHz
- 1.8° at 40kHz
- Thermal distortion : Below measurement threshold
- Technologies : ADHV2®, SAM®, AIR®, EVO®, DAC Magic Wire®, RAM®
- Intelligence :
- 3 x SHARC 400 MHz DSP’s
- 1 x 16 MHz RISC processor
- 4 x 40 MHz RISC processors
- 1 x 64 MHz RISC processor
- Synchronisation :
- Up to 8 units
INPUTS / OUTPUTS
- Wi-Fi :
- 2.4GHz 802.11 b/g/n Wi-Fi input for the Devialet AIR universal streamer
- Supported formats: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
- Ethernet RJ45 :
- RJ45 10/100 Mbps Ethernet input for the Devialet AIR universal streamer
- Supported formats: 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
- USB :
- USB Audio 2.0 asynchronous input/output
- Supported formats:
- 16-bit/44.1 kHz PCM to 32-bit/192 kHz PCM
- DSD64 1bit/2.822400MHz and 1bit/3.072000MH
- Supported formats:
- Very low latency
- Bi-directionality for digitisation of the active source
- S/PDIF TOSLINK optical connector : Supported formats : DSD64 1bit/2.822400MHz and 1bit/3.072000MH
- 3.5mm mini-jack S/PDIF optical + RS232 connector :
- Supported formats: 16-bit/44.1 kHz to 24-bit/96 kHz
- Device control via the bidirectional RS232 protocol up to 115200 bauds (documentation available via the configurator)
- RCA 1 & RCA 2 connector (selected via the configurator) :
- 1 or 2 coaxial S/PDIF digital inputs
- Supported formats:
- 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
- DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
- 1 S/PDIF coaxial (RCA1) digital output
- Supported formats: PCM 24bits/48kHz/96kHz/192kHz
- Multi-room use and monitoring loop
- Pre-amplified analogue output
- Fixed or variable volume
- Output level up to 4 VRMS
- Stereo/mono/left/right mixing
- Active filtering available
- WM8740 D/A convertor operating at 24 bits/192 kHz
- Compatible with subwoofer, headphone amplifier, monitoring loop
- May be activated / deactivated via remote control
- RCA 3 & RCA 4 connectors (selected via the configurator) :
- Line-in stereo analogue input
- 24-bit/96 kHz or 24-bit/192 kHz sampling
- T.I. PCM4202 A/D convertor
- Accepts voltages up to +/- 10V
- Maximum recommended level: 4 VRMS
- Analog input stereo phono level
- 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
- T.I. PCM4202 A/D convertor
- Accepts voltages up to +/- 100mV
- Maximum recommended level: 15mVRMS
- Advanced conversion stage
- 1 or 2 coaxial S/PDIF digital inputs
- Supported formats:
- 16-bit/44.1 kHz PCM to 24-bit/192 kHz PCM
- DSD64 1bit/2.822400MHz and 1bit/3.072000MHz
- Mini-jack 3.5mm : 3.5mm mini-jack trigger connector
- Speaker output :
- 4mm banana plugs, stripped cables or fork connectors
- Adjustable from 30 WRMS to 220 WRMS via the configurator
- Compatible with all speakers, from 2Ω to 16Ω
- Short-circuit protection
- Active filtering available
- Output impedance: 0.001Ω
PHONO STAGE
- Type of supported cartridges: MM/MC
- MM sensitivity from 1mVRMS to 15mVRMS
- MC sensitivity from 100 μVRMS to 5000 μVRMS
- 256 combinations for the resistive/capacitive loading of the cartridge
- Stereo/mono/left/right mixing
- 13 equalisation curves available
- Specific menu for dynamic adjustment of all these settings
PREAMPLIFIER & MAIN DAC
- Patented Magic Wire Digital / Analogue Converter, D/A T.I. PCM1792
- Unique high-precision MasterClock with very low jitter: 2ps rms
- Conversion of all inputs into 24-bit/192 kHz
- Built-in DSD / PCM conversion
- SAM profile via configurator allowing the precise adaptation of the sound signal to the specifications of your speakers
- Available active filtering on all analogue outputs via configurator
- Volume control in increments of 0.5 dB
- Volume adjustment range: -97.5 dB to +30.0 dB
- Bypass/pass-thru mode available input by input
- Balance adjustment
- Tone control: bass +/-18 dB, treble +/-18 dB with variable frequency cut-off via configurator
OMNIDIRECTIONAL RADIO REMOTE CONTROL
- Chassis carved out of a single aluminium block
- Dark chrome finish
- Hand polishing, unique piece
- Dimensions: 114 mm x 114 mm x 34 mm (l, w, h)
- Weight: 343g (without batteries)
- Requires 3 AAA batteries (1.5V LR03), provided – service life of a set of batteries: 5 years
- No pairing required
- Ultra responsive, latency < 3ms
ELECTRICAL POWER SUPPLY
- Universal 90-240Vac – 50/60Hz
- Power cable provided adapted to the country
- Patented single stage switching mode topology
- High power level: 600W continuous, 4000W peak
- High output with power factor correction (PFC)
- High resiliency to hazards potentially encountered on distribution networks : brownouts, quick transients, overloads
- PLC Compatible
CONTENT OF THE BOX
- 1 Devialet Expert 220 Pro
- 1 Power cable
- 1 User Manual
- 1 Warranty booklet (5 years)
- 1 Microfibre cloth
- 1 Pair of gloves
- 1 SD card
- 1 Remote Expert (3 AAA batteries LR03 1,5V provided)
